ARC T-Barrier Foundation
Price range: £123.30 through £196.20
ARC T-Barrier Foundation
The ARC T-Barrier® Foundation is a fully tested IFC certificated cavity barrier with a stalk to ensure correct positioning of the cavity barrier, for use at the foundation level of masonry construction. The ARC T-Barrier® Foundation has been rigorously tested to meet or exceed the performance requirements laid out in UK and Irish Building Regulations, helping to ensure safer homes. The T-Barrier® Foundation is supplied with an integral DPC as standard.
Key Facts:
- Up to 240 minutes fire integrity
- Seals edge of party wall cavity
- Zero U-Value at party wall can be achieved
- Up to three times more effective as an edge seal than conventional systems
- Minimises thermal bypass
- Easy to install
- Third-party certificated by IFC
- 100mm Party Wall Cavity
Application:
ARC T-Barrier® Foundation is designed to be used at foundation level before the brickwork commences. It is supplied in a short 600mm length, encapsulated in high-strength polythene to provide maximum protection from the elements. The shorter length is ideal to ensure the product is protected during the time between install and commencement of brickwork. The person installing the T-Barrier Foundation® should first familiarise themselves with the datasheet, ensuring the correct product is being fitted into the cavity.
All performance claims made are evidenced in the IFC certification IFCC 1728.
Test reports, third party certification and MSDS available on request.
Installation instructions
Additional information
| Weight | 5 kg |
|---|---|
| Length | 600mm |
| Size | TBM100/100GW – Up to 100mm External Cavity – Pack of 12, TBM100/125GW – Up to 125mm External Cavity – Pack of 8, TBM100/150GW – Up to 150mm External Cavity – Pack of 6 |
| Party Wall Cavity Size | 100mm |
Can this product be used with an SFS internal leaf?
ARC T-Barrier® Foundation is fire rated and certified for use in a traditional masonry construction.
Do I take it out of the coloured sleeve?
The polythene sleeve is there to provide product identification and protection from the elements and should therefore be left in place. It does not add to the performance of the product so can be safely cut into, and the product can still be used should the polythene be damaged.
Can this cover multiple cavity sizes?
The ARC T-Barriers® are designed to suit specific cavity widths and are available in 5mm increments. It’s important that the appropriate size is fitted to achieve the required compression fit and to ensure the product performs as expected.
You may also like…
-
ARC T-Barrier Masonry
Price range: £76.95 through £122.40 Select options This product has multiple variants. The options may be chosen on the product page -
ARC Soffit Slab
£117.30 £140.76 incl. VAT Add to basket -
ARC Cavity Stop Sock
Price range: £66.00 through £82.50 Select options This product has multiple variants. The options may be chosen on the product page -
ARC Spandrel Barrier
£199.80 £239.76 incl. VAT Add to basket
Related products
-
ARC Eaves Insulator
Price range: £84.60 through £96.00 Select options This product has multiple variants. The options may be chosen on the product page -
Knauf DriTherm 37 Cavity Wall Insulation
Price range: £21.49 through £33.28 Select options This product has multiple variants. The options may be chosen on the product page -
ARC Wired Tile Batten Barrier
£95.00 £114.00 incl. VAT Add to basket -
ARC T-Barrier Pitched Roof
£139.50 £167.40 incl. VAT Add to basket